Grandstream Phones

Fonality currently offers and supports Grandstream Phones (BudgetTone 200 and GXP2000).  We will strive to document everything you wish to know about Grandstream phones, configuration parameters, and any known issues within this page. Of course, if you have any suggestions, please email wiki@fonality.com

User Manuals

BudgetTone 200 User Manual

BudgetTone 200 Quick Installation Guide

GXP2000 FONcore Installation Guide

GXP2000 Quick Installation Guide

Configuration

GXP2000 Speed Dial

1. Find the Phone's IP

   1. The IP address is displayed on the LCD of the phone (in standard configuration)

   2. If you have any missed calls, you will need to clear these calls before the IP address will be displayed on the LCD

2. Using a web browser, navigate to the IP address of the phone, and login with admin (password blank)

3. Click on Basic Settings

4. For Multi Purpose Key 1, set the Key Mode to Speed Dial

5. Set the Account to Account 1

6. Set the Name to something that you will remember

7. Set the UserID to the phone number, extension or keycode you wish to dial

8. Repeat steps 4-7 for all other required Multi Purpose Keys

9. Click Update at the bottom

10. After the phone reboots, the speed dials will be active

How to set the configuration server/boot server

1. After connecting your GXP2000 to the network, power it on.

2. The phone should go through a boot process and will eventually display it's IP address on screen. Example: 192.168.15.101     Write this IP address down, this is your GXP2000's PRIVATE IP Address.

3. On a PC connected to the same private network, open a web browser and browse the PRIVATE IP Address of your GXP2000. Example:  http://192.168.15.101

4. You will be prompted for a password. The password is admin [case sensitive].

   Open

   

5. The screen will refresh, and you'll "land" on the Advanced Settings tab on the phones Web User Interface, as shown to the right.

6. In the "Firmware Upgrade and Provisioning" section, select "Upgrade Via: TFTP".

7. Find the "Config Server Path" field and enter the Private IP address of your PBX. If you do not know the IP of your PBX, please refer to this article: How Do check my server's IP address?

8. Once you've finished entering the IP, click Update at the bottom of the screen.

Known Issues

Grandstream phones do not auto off-hook when dialing through HUD2

This includes: parking/hold when triggered using HUD, calling out via HUD, barging, et al.  Other features should work as expected.  Fonality does not plan to resolve this issue because the release of HUD3 will deprecate HUD2 entirely and no further updates will be released for the HUD2 Client application.