Published Jul 01, 2024
Polycom IP 4000 Factory Flash
Method 1
IP 4000: hold down 6, 8 and * dial pad keys (only those), until prompted for a password.
You will most likely need to contact us for the Polycom password, unless it is the factory default of "456".
Method 2
Press the 'Menu' hard key.
Arrow to 'Settings' and press the Enter soft key.
Arrow to 'Advanced' and press the Enter soft key.
Enter in your admin password to the phone (Please contact us for the polycom password).
Hit the Enter soft key.
Arrow to 'Admin Settings' and press the Enter soft key.
Arrow to 'Reset to Default and press the Enter soft key.
Arrow to 'Reset Device Settings' and press the Enter soft key.
, multiple selections available,
Related content
Polycom 501, 601, 550 & 650 Factory Flash
Polycom 501, 601, 550 & 650 Factory Flash
More like this
Polycom 320/330 Flash, configuration, boot server
Polycom 320/330 Flash, configuration, boot server
More like this
Aastra 480i & 480iCT Factory Flash
Aastra 480i & 480iCT Factory Flash
More like this
Aastra 51i or 6751i Factory Flash
Aastra 51i or 6751i Factory Flash
More like this
Open Source - How to reset Polycom phones to factory device settings
Open Source - How to reset Polycom phones to factory device settings
More like this
Phones - Configuring a Polycom® VVX® 400 / VVX® 410
Phones - Configuring a Polycom® VVX® 400 / VVX® 410
More like this