/
Polycom 320/321/330/331 Boot Server - video
Polycom 320/321/330/331 Boot Server - video
- Kelli Higdon
Owned by Kelli Higdon
Jul 01, 2024
1 min read
Analytics
Loading data...
On a phone with DHCP enabled:
You must also select DHCP Menu, and change the Boot server type to Static.
Otherwise, only do what's indicated in the video, except when entering the IP.
The server address shown in the video is an example (10.10.10.20). Replace this with the IP address of your PBX.
, multiple selections available,
Related content
How to: Register a Polycom IP Phone with your Server
How to: Register a Polycom IP Phone with your Server
More like this
Polycom 320/330 Flash, configuration, boot server
Polycom 320/330 Flash, configuration, boot server
More like this
Setting the Boot Server
Setting the Boot Server
More like this
Polycom 501, 601, 550 & 650 Factory Flash
Polycom 501, 601, 550 & 650 Factory Flash
More like this
Polycom IP 330 and 331 series configuration instructions for Fonality Connect
Polycom IP 330 and 331 series configuration instructions for Fonality Connect
More like this
Polycom IP 501, 601, 550 & 650 configuration instructions for Connect service
Polycom IP 501, 601, 550 & 650 configuration instructions for Connect service
More like this