IMG 1010 - SIP to SIP-T Interworking

1 Description:
2 Accessing this Pane:
3 Maximum Objects:
4 Related Topics:
5 ClientView Pane:
6 Field Descriptions:

Description:

In software 10.5.2 a feature was added to allow the IMG to accept a SIP message which originally had no ISUP information in it and create a SIP-T message which has the ISUP information embedded in its SIP body. The information below will explain how to configure the IMG to accept the incoming SIP message and send it out a SIP-T message.

Accessing this Pane:

Dialogic IMG EMS -> Profiles -> SIP SGP -> SIP to SIP-T Interworking

Maximum Objects:

1 per individual SIP SGP Profile

ClientView Pane:

Field Descriptions:

SIP To SIP Interworking: (Disabled - Default)

Select from a drop down menu whether the SIP to SIP-T Interworking is Disabled or Enabled. When enabled SIP-T Entity field can now be modified.

To Enable SIP-T, the "Enable SIP-T" field in the SIP Signaling object must be set to 'Yes'. Verify that this field is configured correctly.

SIP-T Entity:

When 'SIP To SIP-T Interworking' field above is enabled, the SIP-T Entity field will display a drop down menu which includes all the SIP Entities created under the SIP Signaling object.

For each of the ISUP Parameters described below the individual fields are initially filled-in with f's. A field that has all f's in it will send a Default value for that parameter. Each parameter explained below will have a link set up. The links refer to a table which includes values for that parameter (binary form). Where applicable the Default value is marked in bold text. If the default value marked in bold is not going to be Interworked, the user must enter a hex value corresponding to the value that will be used.

IAM - Nature Of Connection Indicators:

The Nature of Connection Indicator is sent in the forward direction to provide information regarding the circuit connection specified in the CIC parameter of the message. This message is one byte. Click on the following link to display a table of the Nature of Connection Indicators. Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

Nature of Connection Indicators

	H	G	F	E	D	C	B	A
Satellite indicator
No Satellite circuit in the connection (Default)							0	0
One Satellite circuit in the connection							0	1
Two Satellite circuits in the connection							1	0
Three or more Satellite circuit in the connection							1	1
Continuity check indicator
Continuity Check not required (Default)					0	0
Continuity Check required in this circuit					0	1
Continuity Check performed in this circuit					1	0
Spare					1	1
Echo control device indicator
Outgoing half echo control device not included (Default)				0
Outgoing half echo control device included				1
Spare	0	0	0

IAM - Forward Call Indicators:

Contain information that specifies both the preferences about the call setup in the forward direction and the conditions encountered so far in setting up the call. This message is two bytes. Click on the following link to display a table of the Forward Call Indicators (Octets 1 and 2). Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

Forward Call Indicators (Octet 1)

	H	G	F	E	D	C	B	A
Incoming International Call Indicator
Not an incoming international call								0
Incoming international call								1
End to End Method Indicator
No end to end method available						0	0
Pass-along method available						0	1
SCCP method available						1	0
Pass-along and SCCP method available						1	1
Interworking Indicator
No Interworking encountered (SS7 all the way)					0
Interworking Encountered					1
IAM segmentation indicator
No Indication				0
Additional Info being sent by unsolicited info mag				1
ISUP Indicator
ISUP not used all the way			0
ISUP used all the way			1
ISUP Preference Indicator
ISUP preferred all the way	0	0
ISUP not required all the way	0	1
ISUP required all the way	1	0
Spare	1	1

Forward Call Indicators (Octet 2)

	H	G	F	E	D	C	B	A
ISDN access indicator
Originating access non-ISDN								0
Originating access ISDN								1
SCCP method indicator
No indication						0	0
Connection-ess method available						0	1
Connection-oriented method available						1	0
Connection-ess and connection-oriented available						1	1
Spare					0
Ported number translation indicator
Number not translated				0
Number Translated				1
No QoR routing attempt in progress			0
QoR routing attempt in progress			1
Reserved for National Use	0	0

IAM - Calling Party's Category:

Information sent in the forward direction indicating the category of the calling party and, in case of semi-automatic calls, the service language to be spoken by the incoming, delay and assistance operators. Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

Calling Party Category (Octet 1)

	H	G	F	E	D	C	B	A
Unknown calling party category			0	0	0	0	0	0
operator, language French			0	0	0	0	0	1
operator, language English			0	0	0	0	1	0
operator, language German			0	0	0	0	1	1
operator, language Russian			0	0	0	1	0	0
operator, language Spanish			0	0	0	1	0	1
Ordinary Calling subscriber			0	0	1	0	1	0
Test Call			0	0	1	1	0	1

IAM - Transmission Medium Requirement:

The transmission medium used in a call setup is sent in the backward direction in the event that the original circuit requested could not be used.. This parameter then identifies the circuit type and is carried in the ANM, ACM, and CPG messages. Click on the following link to display a table of the Transmission Medium Requirements Table (Octets 1 and 2). Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

Transmission Medium Requirement

	H	G	F	E	D	C	B	A
Transmission Medium Used
Speech	0	0	0	0	0	0	0	0
Spare	0	0	0	0	0	0	0	1
Reserved for 64kbps unrestricted	0	0	0	0	0	0	1	0
3.1 kHz audio	0	0	0	0	0	0	1	1
Reserved	0	0	0	0	0	1	0	0
Reserved	0	0	0	0	0	1	0	1
Reserved for 64 kbps preferred	0	0	0	0	0	1	1	0
Reserved	0	0	0	0	0	1	1	1
	to
	0	0	0	0	1	0	1	0
Spare	0	0	0	0	1	0	1	1
	to
	1	1	1	1	1	1	1	1

IAM - User Service Information:

Used when the subscriber is requesting data transmission on the voice facility without the use of a modem. Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

User Service Information (Octet 1)

	H	G	F	E	D	C	B	A
User transfer capability
Speech				0	0	0	0	0
Unrestricted digital information				0	1	0	0	0
Restricted digital information				0	1	0	0	1
3.1 kHz audio				1	0	0	0	0
7 kHz audio				1	0	0	0	1
Coding Standard
ITU standardized coding		0	0
National standard		1	0
Extension Bit
Octet continues through the next octet	0
Last Octet	1

User Service Information (Octet 2)

	H	G	F	E	D	C	B	A
Information Transfer Rate
Code for packet mode calls				0	0	0	0	0
64 kbps				1	0	0	0	0
384 kbps				1	0	0	1	1
1472 kbps (national ansi only)				1	0	1	0	0
1536 kbps				1	0	1	0	1
1920 kbps				1	0	1	1	1
Multirate (64 kbps based)				1	1	0	0	0
Transfer Mode
Circuit Mode		0	0
Packet Mode		1	0
Extension bit
Octet continues through the next octet	0
Last Octet	1

User Service Information (Octet 2a)

	H	G	F	E	D	C	B	A
Establishment
Demand							0	0
Configuration
Point to Point					0	0
Structure
Default		0	0	0
8kHz integrity		0	0	1
Service data unit integrity		1	0	0
Unstructured		1	1	1
Extension Bit
Octet continues through the next octet	0
Last Octet	1

User Service Information (Octet 2b)

	H	G	F	E	D	C	B	A
Information Transfer Rate
Code for packet mode calls				0	0	0	0	0
64 kbps				1	0	0	0	0
384 kbps				1	0	0	1	1
1472 kbps				1	0	1	0	0
1536 kbps				1	0	1	0	1
1920 kbps				1	0	1	1	1
Multi-rate (64 kbps based)				1	1	0	0	0
Symmetry
Bi-directional symmetry		0	0
Extension bit
Octet continues through the next octet	0
Last Octet	1

User Service Information (Octet 2.1) present if octet 2 indicates multi-rate 64 kbps

	H	G	F	E	D	C	B	A
Rate Multiplier
Reserved (0)		0	0	0	0	0	0	0
1 to 30		0	0	0	0	0	0	1
to
31 to 127		0	0	1	1	1	1	0
31 to 127		0	0	1	1	1	1	1
to
		1	1	1	1	1	1	1
Extension Bit
Octet continues through the next octet	0
Last Octet	1

User Service Information (Octet 3)

	H	G	F	E	D	C	B	A
User Information layer 1 protocol
ITU standardized rate adaption V.110/X.30				0	0	0	0	1
Recommendation G.711 u-law speech				0	0	0	1	0
Recommendation G.722 AND g.725 7 kHz audio				0	0	1	0	1

User Service Information (Octet 5)

	H	G	F	E	D	C	B	A
User Information (layer 3 protocol)
ANSI T1.607				0	0	0	1	0
Recommendation x.25 packet layer				0	0	1	1	0
Layer 3 identifier		1	1
Extension Bit
Octet continues through the next octet	0
Last Octet	1

Called Party's Number:

The destination number that the calling party dials. Click on the following link below to display a table of the Called Party Number (Octets 1 and 2). The fields in bold are the default fields that the IMG will Interwork when feature is enabled. Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

Called Party Number (Octet 1)

	H	G	F	E	D	C	B	A
Nature of Address Indicator
Spare		0	0	0	0	0	0	0
Subscriber Number		0	0	0	0	0	0	1
Spare, reserved for national use		0	0	0	0	0	1	0
National significant number		0	0	0	0	0	1	1
International Number		0	0	0	0	1	0	0
Spare		0	0	0	0	1	0	1
to
		1	1	1	0	0	0	0
Subscriber number, operator requested		1	1	1	0	0	0	1
National Number, operator requested		1	1	1	0	0	1	0
International Number, operator requested		1	1	1	0	0	1	1
No number present, operator requested		1	1	1	0	1	0	0
No number present, cut-through call to carrier		1	1	1	0	1	0	1
950 call from local exchange carrier public station, hotel/motel, or non exchange access end office		1	1	1	0	1	1	0
Test Line code		1	1	1	0	1	1	1
Reserved for network specific use		1	1	1	1	0	0	0
to
		1	1	1	1	1	1	0
Spare		1	1	1	1	1	1	1
Odd/Even bits
Even Number of address signals	0
Odd Number of address signals	1

Called Party Number (Octet 2)

	H	G	F	E	D	C	B	A
Reserved					0	0	0	0
Numbering Plan
Unknown Numbering Plan		0	0	0	0	0	0	1
ISDN Numbering Plan (Rec.E.164, E.163)		0	0	1
Spare		0	1	0
Reserved ITU-TS data numbering plan		0	1	1
Reserved ITU-TS telex numbering plan		1	0	0
Private Numbering Plan		1	0	1
Spare		1	1	0
Spare		1	1	1
Spare		1	1	1
Spare	0

Called Party Number (Octet 3)

	H	G	F	E	D	C	B	A
Address signal-first address
Digit 0					0	0	0	0
Digit 1					0	0	0	1
Digit 2					0	0	1	0
Digit 3					0	0	1	1
Digit 4					0	1	0	0
Digit 5					0	1	0	1
Digit 6					0	1	1	0
Digit 7					0	1	1	1
Digit 8					1	0	0	0
Digit 9					1	0	0	1
Spare					1	0	1	0
Code 11					1	0	1	1
Code 12					1	1	0	0
Spare					1	1	0	1
Spare					1	1	1	0
End of Pulse Signal					1	1	1	1
Address signal-second address
Digit 0	0	0	0	0
Digit 1	0	0	0	1
Digit 2	0	0	1	0
Digit 3	0	0	1	1
Digit 4	0	1	0	0
Digit 5	0	1	0	1
Digit 6	0	1	1	0
Digit 7	0	1	1	1
Digit 8	1	0	0	0
Digit 9	1	0	0	1
Spare	1	0	1	0
Code 11	1	0	1	1
Code 12	1	1	0	1
Spare	1	1	0	1
Spare	1	1	1	0
End of Pulse signal	1	1	1	1

ACM - Backward Call Indicators and CON - Backward Call Indicators:

Sent in the "backward" direction to indicate that the remote end of a trunk circuit has been reserved. Information relating to the characteristics of the connection, signaling path and called party sent in the backward direction. Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

Backward Call Indicators (Octet 1)

	H	G	F	E	D	C	B	A
Charge Indicators
No Indication							0	0
No Charge							0	1
Charge							1	0
Spare							1	1
Called Party Status Indicator
No Indication					0	0
Subscriber free					0	1
Connect when free					1	0
Excessive Delay					1	1
Called Partys Category Indicator
No Indication			0	0
Ordinary Subscriber			0	1
Pay Phone			1	0
Spare			1	1
End to end method indicator
No end-to-end method available	0	0
Pass-along method available	0	1
SCCP method available	1	0
Pass-along and SCCP methods available	1	1

Backward Call Indicators (Octet 2)

	H	G	F	E	D	C	B	A
Interworking Indicator
No Interworking encountered								0
Interworking Encountered								1
IAM segmentation indicator
No Indication							0
Additional Info has been received and added to IAM							1
ISUP Indicator
ISUP Not used all the way (end to end)						0
ISUP used all the way (end to end)						1
Holding Indicator
Holding not required					0
Holding required					1
ISDN access indicator
Terminating access non-ISDN				0
Terminating Access ISDN				1
Echo Control device indicator
Incoming half-echo control device not included			0
Incoming half-echo control device included			1
SCCP method indicator
No Indication	0	0
Connectionless method available	0	1
Connection-oriented method available	1	0
Connectionless and connection-oriented method available	1	1

CPG - Event Information:

Information indicating the type of event which caused a call progress message to be sent. Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

Event Information

	H	G	F	E	D	C	B	A
Event Indicator
Spare		0	0	0	0	0	0	0
Altering		0	0	0	0	0	0	1
Progress		0	0	0	0	0	1	0
In Band info or appropriate pattern now available		0	0	0	0	0	1	1
Call forwarded on busy		0	0	0	0	1	0	0
Call forwarded on no reply		0	0	0	0	1	0	1
Call forwarded unconditional		0	0	0	0	1	1	0
Call Deflected		0	0	0	0	1	1	1
Notification for supplementary service		0	0	0	1	0	0	0
Spare		0	0	0	1	0	0	1
	to
		1	1	0	1	1	1	0
Service Information included		1	1	0	1	1	1	1
Spare		1	1	1	0	0	0	0
	to
		1	1	1	1	1	1	0
Reserved		1	1	1	1	1	1	1
Event Presentation
No Indication	0
Presentation restricted	1

REL - Cause Indicators:

Information sent in either direction indicating the reason for sending the message (e.g. release message). Where applicable, the default values are displayed in bold. These are the default values that the IMG will Interwork when feature is enabled.

Cause Indicators (Octet 1/Reason)

	H	G	F	E	D	C	B	A
Location
User					0	0	0	0
Local private network					0	0	0	1
local public network					0	0	1	0
Transit Network					0	0	1	1
Remote Local Network					0	1	0	0
Remote Private Network					0	1	0	1
Local interface controlled by this signaling link					0	1	1	0
International Network					0	1	1	1
Network beyond interworking point					1	0	1	0
Spare				0
Coding Standard
ITU-TS standard		0	0
Reserved for other international standards		0	1
Ansi Standard		1	0
Reserved		1	1
Extension Bit
Parameter continues to next octet	0
Last octet	1

Cause Indicators (Octet 2/Cause) Class 000 and 001 Normal Event

	H	G	F	E	D	C	B	A
Class 000 and 001, Normal Event
Unallocated Number	0	0	0	0	0	0	0	1
No Route to specified transit network	0	0	0	0	0	0	1	0
local public network No route to destination	0	0	0	0	0	0	1	1
Send special information tone	0	0	0	0	0	1	0	0
Mis-dialed trunk prefix	0	0	0	0	0	1	0	1
Preemption	0	0	0	0	1	0	0	0
Preemption-circuit reserved for reuse	0	0	0	0	1	0	0	1
Normal Clearing	0	0	0	1	0	0	0	0
User Busy	0	0	0	1	0	0	0	1
No user responding	0	0	0	1	0	0	1	0
No answer from user	0	0	0	1	0	0	1	1
Subscriber absent	0	0	0	1	0	1	0	0
Call Rejected	0	0	0	1	0	1	0	1
Number Changed	0	0	0	1	0	1	1	0
Redirect to a new destination	0	0	0	1	0	1	1	1
Destination out of order	0	0	0	1	1	0	1	1
Address Incomplete	0	0	0	1	1	1	0	0
Facility rejected	0	0	0	1	1	1	0	1
Normal Unspecified	0	0	0	1	1	1	1	1

Cause Indicators (Octet 2/Cause) Class 010 Resource Unavailable

	H	G	F	E	D	C	B	A
Class 010, Resource Unavailable
No circuit/Channel available	0	1	0	0	0	0	1	0
Network out of order	0	1	0	0	0	1	1	0
Temporary failure	0	1	0	0	1	0	0	1
Switching equipment congestion	0	1	0	0	1	0	1	0
Access information discarded	0	1	0	0	1	0	1	1
Requested circuit/channel not available	0	1	0	0	1	1	0	0
Precedence call blocked	0	1	0	0	1	1	1	0
Resource Unavailable-Unspecified	0	1	0	0	1	1	1	1

Cause Indicators (Octet 2/Cause) Class 011 Service or option Not Available

	H	G	F	E	D	C	B	A
Class 011, Service or option Not Available
Requested facility not subscribed		0	1	1	0	0	1	0
Outgoing calls barred within closed user group		0	1	1	0	1	0	1
Incoming calls barred within closed user group		0	1	1	0	1	1	1
Bearer capability not authorized		0	1	1	1	0	0	1
Bearer capability not currently available		0	1	1	1	0	1	0
Inconsistency in designated outgoing access and subscriber class		0	1	1	1	1	1	0
Service option not available-unspecified		0	1	1	1	1	1	1

Cause Indicators (Octet 2/Cause) Class 100 Service or option Not Implemented

	H	G	F	E	D	C	B	A
Class 100, Service or option Not Implemented
Bearer capability not implemented		1	0	0	0	0	0	1
Requested facility not implemented		1	0	0	0	1	0	1
Only restricted digital info beaerer capability available		1	0	0	0	1	1	0
Service not implemented-unspecified		1	0	0	1	1	1	1

Cause Indicators (Octet 2/Cause) Class 101 Invalid Message

	H	G	F	E	D	C	B	A
Class 101, Invalid message
User not member of closed group		1	0	1	0	1	1	1
Incompatible destination		1	0	1	1	0	0	0
Nonexistent closed user group		1	0	1	1	0	1	0
Invalid transit network selection		1	0	1	1	0	1	1
Invalid Message, unspecified		1	0	1	1	1	1	0

Cause Indicators (Octet 2/Cause) Class 110 Protocol Error

	H	G	F	E	D	C	B	A
Class 110, Protocol Error
Message type nonexistent or not implemented		1	1	0	0	0	0	1
Information element parameter nonexistent/not implemented		1	1	0	0	0	1	1
Recovery on timer expiration		1	1	0	0	1	1	0
Parameter nonexistent/not implemented-passed on		1	1	0	0	1	1	1
Message with unrecognized parameter discarded		1	1	0	1	1	1	0
Protocol Error, unspecified		1	1	0	1	1	1	1

Cause Indicators (Octet 2/Cause) Class 111 Interworking Class

	H	G	F	E	D	C	B	A
Class 111, Interworking Class
Interworking, unspecified		1	1	1	1	1	1	1

ANSI Cause Indicators:

Cause Indicators (Octet 2/Cause) Class 000 and 001 Normal Event

	H	G	F	E	D	C	B	A
Class 000 and 001, Normal Event
Unallocated Destination Number		0	0	1	0	1	1	1
Unknown business group		0	0	1	1	0	0	0
Exchange Routing error		0	0	1	1	0	0	1
Misrouted call to a ported number		0	0	1	1	0	1	0
Number portability Query on Release (QoR) number not found		0	0	1	1	0	1	1

Cause Indicators (Octet 2/Cause) Class 010 Resource Unavailable

	H	G	F	E	D	C	B	A
Class 010, Resource Unavailable
Preemption		0	1	0	1	1	0	1
Preemption Call blocked		0	1	0	1	1	1	0

Cause Indicators (Octet 2/Cause) Class 010 Resource Unavailable

	H	G	F	E	D	C	B	A
Class 010, Resource Unavailable
Preemption		0	1	0	1	1	0	1
Preemption Call blocked		0	1	0	1	1	1	0

Cause Indicators (Octet 2/Cause) Class 011 Service or Option Not Available

	H	G	F	E	D	C	B	A
Class 011, Service or Option Not Available
Call type incompatibility with service request		0	1	1	0	0	1	1
Call blocked due to group restrictions		0	1	1	0	1	1	0
Extension Bit	0

Cause Indicators (Octet 3) Diagnostics

	H	G	F	E	D	C	B	A
Diagnostics	0	0	0	0	0	0	0	0

The diagnostics field is dependent on the cause value. The following lists the cause codes that generate a diagnostics field and the parameter structure used for the diagnostic value.

Diagnostics Cause Codes

Diagnostic	Structure
Called Party Number	See Called party parameter	0	0	1	0	1	1	0
Transit Network Identity	Transit Network Selection	0	1	0	0	1	1	0
Transit Network Identity	Transit Network Selection	0	1	0	1	0	1	0
Attribute identity	See Below	0	1	1	1	0	0	1
Attribute identity	See Below	0	0	1	1	0	1	0
Attribute identity	See Below	1	1	0	0	0	0	1

Attribute Identity

	H	G	F	E	D	C	B	A
Attribute Identity
Information transfer capability		0	1	1	0	0	0	1
Information transfer mode		0	1	1	0	0	1	0
Information transfer rate		0	1	1	0	0	1	1
Structure		0	1	1	0	1	0	0
Configuration		0	1	1	0	1	0	1
Establishment		0	1	1	0	1	1	0
Symmetry		0	1	1	0	1	1	1
Information transfer rate (dest. to origination)		0	1	1	0	0	0	0
Layer identification and corresponding user info		0	1	1	1	0	0	1

Dialogic Integrated Media Gateways

IMG 1010 - SIP to SIP-T Interworking

Description:

Accessing this Pane:

Maximum Objects:

Related Topics:

ClientView Pane:

Field Descriptions:

SIP To SIP Interworking: (Disabled - Default)

SIP-T Entity:

IAM - Nature Of Connection Indicators:

IAM - Forward Call Indicators:

IAM - Calling Party's Category:

IAM - Transmission Medium Requirement:

IAM - User Service Information:

Called Party's Number:

ACM - Backward Call Indicators and CON - Backward Call Indicators:

CPG - Event Information:

REL - Cause Indicators:

ANSI Cause Indicators:

Return to Documentation Home I Return to Sangoma Support