Sangoma Analog Cable Pinout

If you ever need to create a cable to connect a Sangoma analog card (A200), please use the following instructions as a guide:

For all Sangoma Analog cards, note that you must use a narrow RJ11/4 tip. Standard Analog tips are RJ11/6 - please be careful when you source these parts from a local telco shop. You should crimp the RJ11/4 head on the end that will connect directly to the Sangoma analog card. The other end should be crimped with a standard RJ11/6 tip.

The pin-out is:

Begin inserting the wires at slot 2. You will leave slots 1 & 6 empty.

Cables are straight through for both FXO and FXS.