/
How to enable Beep after an assisted transfer

How to enable Beep after an assisted transfer

Owned by Merry Arpaia
Last updated: Dec 06, 2024 by Kelli Higdon
1 min read

How to enable Beep after an assisted transfer

  1. Log into the PBX as admin

  2. Hover over Setup

  3. Click Setting

  4. Make sure the System Setting tab is highlighted

  5. Find the General Settings section

  6. Find Beep after an Assisted Transfer

  7. Set this to option to YES

  8. Save Extension Settings 

Related content

Fonality - Change Default System Voice Prompt Recordings - How do I
Fonality - Change Default System Voice Prompt Recordings - How do I
Fonality
More like this
FreePBX Included Sound Prompts
FreePBX Included Sound Prompts
FreePBX Open Source
More like this
Fonality - Upload a pre-recorded voice prompt or auto-attendant greeting - How do I?
Fonality - Upload a pre-recorded voice prompt or auto-attendant greeting - How do I?
Fonality
More like this
Record Sound
Record Sound
Switchvox
More like this
Play Sound
Play Sound
Switchvox
More like this
Play Sound (6.0)
Play Sound (6.0)
Switchvox
More like this
Unable to render {include} The included page could not be found.